Internet TAXSIM Version 27
As of 23 January 2018 taxsim27 incorporates <TCJA except for business income deduction.
TAXSIM is the NBER's FORTRAN program for calculating liabilities under US Federal and State income tax laws from individual data. Scholars interested in using TAXSIM to calculate tax liabilities and marginal tax rates should follow the these instructions for submitting data. Liabilities are returned as an online web page in a few seconds. The program itself is available to NBER associates and government agencies.
The federal law is accurate to the best of our abilities through 2023, including the ACA taxes on earned and unearned income (but not the penalties for lacking health insurance). State tax is 1977 through 2017 with later years calculated using the "real" value of the 2017 law.
A Stata .ado file interface to TAXSIM is available. Mac users also see here.SAS and command line usage is described here . In the list of variables below the Stata names are in bold. Several users have contributed codes for converting common survey files to taxsim9 format, you should have no trouble modifying them for taxsim27.
Further changes will be noted in a change log .
Calculate liabilities for one taxpayer (fill every numbered box)
OR...Upload a file with TAXSIM data:Obviously most of these will not be available in the typical survey, which will affect the accuracy of the tax calculation but won't disturb the software. Do not include rental real estate taxes or state income tax as they will be calculated from other data on this page. A state sales tax deduction will be calculated according to publication 600. If items 23,24, 27 and our calculation of state income tax do not exceed the standard deduction, then the taxpayer will be given the standard deduction instead.
Instructions for preparing data for TAXSIM.
If you only need a calculation for one taxpayer you can just fill in the blank box beside each of the 27 variables listed above and select "calculate". Don't leave any box blank - use zeroes for none. Also use a zero for item 3 to indicate 'no state tax'. If you leave any blanks, the caclulator will fail silently. Sorry.
If you have many cases, you can prepare a file, with each line representing a tax return. The file may have any number of lines, and we return a web page with tax liability, etc. for all cases within a few seconds.
Each line of your file should have 27 values separated by spaces or commas - one value for each of the 27 fields shown above in the "Individual taxpayer" section.
A list of state codes and a crosswalk of Census state codes to SOI codes are available, but you have to do the conversion yourself. If you don't want state tax calculations, just set the state id to zero.
This is a simplified list of input variables selected to encompass what might be available in a non-tax oriented survey such as the Survey of Consumer Finance or the Consumer Expenditure Survey. Henry and Day have a comparison of income concepts in several surveys which may be helpful. For labor market surveys such as the CPS, you will have to impute (perhaps just a zero) some deduction items. These items are rich enough to cover the ordinary and supertax brackets, the earned income credit, the child care credit, the partial taxation of Social Security, and UI, the secondary earner deduction, the maximum tax on earned income, the AMT, capital gains preferences, NIIT and other important features of the tax code. At the state level, low income allowances, property and rent credits are calculated if data is available.
If you don't know the wage split between husbands and wives, you can put it all in one category. The computer won't get the perfect answer, but only you can judge the suitability of the simplification. Obviously ignored in this calculation are some limits, floors and ceilings on deductions, all adjustments, esoteric tax preferences, rental loss limitation, etc. These are available in the full TAXSIM model used internally at the NBER, but have been left out of Internet TAXSIM for the sake of simplicity.
Farm income is not listed above - you could put it as wages or property income, or split it up. As wages it will be eligible for the EITC, as property income not. I expect that in an audit the IRS would expect any allocation to have a rational basis, but Taxsim can't do the split for you. Any income item not mentioned above can be placed wherever you think Taxsim will treat it most correctly for the years you need.
A number of states allow optional separate filing for husbands and wives. The tax calculator tries both options and selects the lower tax. If separate filing is chosen non-wage income and deductions are split equally.
Here is a sample entry for a single parent of three children (10,13 and 17) in Idaho with labor income, alimony, a $1000 long term capital loss and $2000 in child care expenses. Notice that no missing value indicator is used - zero amounts are coded as zero.:
Sample input and output files are are available to allow users to make a quick test of the functioning of the server. To run the test right click on the sample file link to download the one case test file to your PC. Then submit it back to our server using the file selection box above. Compare the values returned with the cannonical output file stored on the server. If they are the same, the server has passed a simple test.
The file may include any number of data lines. While the format is flexible, and values may be of variable length, each value must be separated from the next by one or more spaces or a single comma. Tabs won't work. If one line is short of values, the next will be read to make up the set of 27, but a new case always begins on a new line. We cannot read .prn files, or any file that uses commas or dots to mark thousands. Spreadsheet files of any kind can not be read. Before uploading your file please check for the following common errors:
The tax calculator stops on any conversion error or value out of range and returns a range error with the case ID.
Some users are concerned about imputations. Internet TAXSIM only does only one. Social security taxes on wages and business income are imputed and the result used in the calculation of state income tax for the states that have a deduction for that tax. Anything not listed above becomes a zero on the Form 1040. Zero is always a valid entry, although it may be inaccurate.
Marginal Tax Rates
In law, the deduction for state tax on the federal return or federal tax on the state return is based on amount paid, not liability. In Taxsim, the deduction is for liability, raising an issue of simultaneity which is resolved by iteration. For example, assuming the taxpayer is an itemizer on both returns, and that they are in a state that allows a deduction for federal tax, then an increase in the wage of a dollar, and that the federal bracket rate is .1 and the state rate is .05, then an additional dollar of wage increases the federal tax by 10 cents in the first round. Then the state tax is calculated and it goes up by .05*.9 = .045. That is a deduction from the federal tax, and so the second round starts with federal income up by only .965, not a full dollar. And so on for 3 rounds.
There are many notches in the tax law. While most are small, they generate implausible marginal tax rates that are probably not well suited for analytical use. TAXSIM uses four strategies to reduce the number of notches affecting marginal rate calculations.
These effective marginal rates are important to us, because one of the most important uses TAXSIM can be put to is calculating correct after-tax prices in models of economic behavior. A problem has been the presence of decreasing marginal tax rates (notches) and otherwise implausible marginal rates in these calculations. We maintain a list of significant notches that we have noticed. Although notches generally involved very small sums of money, they could have disproportionate effects on the results of a linear regression, which is sensitive to the squared difference of any observation from the mean.
All calculations are done in double precision, so the small finite difference should not reduce accuracy. The alternative strategy of taking a large difference to dilute the notch was not a success when tried.
Nevertheless, most problems arise from actual notches in the tax laws. For example, in the federal law the child care credit is an integer percent of child care expenses, depending on AGI. In this case we have used a smooth interpolation between adjacent percentages even though the tax code prescribes a step function. For the intended purpose of TAXSIM, a little smoothing is a good thing. Especially at the state level some credits are just a fixed amount for taxpayers with income less than X. In that case the range for an smoothing isn't obvious and we have not done any.
Sophisticated users may observe that since notches are part of the law, our strategems bias the results towards lower marginal rates. This is true, but we judge the reduction in variance to be worthwhile.
We are very interested in other solutions to this problem, and suggestions are welcome.
Since the federal and state tax liabilities may depend upon each other, the calculations are iterated, with the calculated state tax entered on the federal form as a (potential) deduction and the federal tax similarly placed in the state calculation. (Yes, we know that in law it is only lagged taxes that matter, but that is less interesting for our purposes). A sales tax deduction is available from 2002 on where it exceeds the state income tax. This is taken from regressions based onIRS publication 600. For tax years after 2016, the 2016 coefficients are used (with an allowance for expected inflation). Refundable credits appear as negative liabilities.
In many cases the marginal rate of tax taken from schedule X, Y or Z of the form 1040 correctly characterizes the tax wedge. But for many taxpayers, their effective marginal rate is affected by a phase-outs other special provision of the tax code. The following claw-backs may affect the marginal rates calculated here:
The marginal rate on "wage income" is an earnings weighted average of the rates on the primary and secondary earners, or equal weights if both are non-workers. The estimate of FICA tax includes both employer and employee portions, and ignores the favorable treatment of self-employment income.
If only a single case is uploaded, intermediate calculations are shown for the base case, and after adding a dollar to income. Also, the analytic effect of each of these clawbacks on the marginal rate for the primary earner is itemized. (This calculation doesn't change if you asked for a different marginal rate - it is always the primary earner). If multiple cases are uploaded, the finite difference is only ten cents, which is more effective at avoiding notches.
Sometimes anomalies have arisen from defects in our FORTRAN code, these have been corrected where we have found them or they have been pointed out to us.
The 9 columns of results returned by default are:
The state tax calculators are more comprehensive than the list of variables above would imply.
In the case of the marginal rate on wage income husbands and wives will have different tax rates if the secondary earner deduction is in effect, or if one is above the social security taxable maximum and the other is not.
If you suspect any case has been calculated incorrectly, please extract that case (or a exemplar, if there are many cases) and run it in individual taxpayer mode. Examine the output to see if it suggests why the result is a surprise, but if you are still of the opinion that TAXSIM got it wrong, please set the case ID (variable 1) to "-1" and email the output web page to me with a statement of what you think is wrong. I will get back to you within a couple of days with an explanation or a fix. It is important that you not send large files or attachments. Just send an email with a few cases, the TAXSIM response and the reason you believe the response to be in error.
We do answer all mail, and we do follow up on queries, but it is important to abide by the guidelines in the previous paragraph. An email message with the statement that "TAXSIM is broken", or even "state x is broken for feature y" will be returned with a request for an example in Internet TAXSIM format as described above. Once we get that, we will compare our results with hand generated results done from a tax form and any problem will soon be resolved. Comments from users have led to significant improvements in the program, and are almost always resolved within 48 hours.
Some users have expressed concern about our ability to process large files, but files up to one million cases are not a problem. Larger files should probably be broken up. Anytime you are getting timed out, please divide your file into small pieces.
Users of the AHEAD and HRS are reminded that they are not permitted to send state identifiers to us. If such users need state tax calculations they should set the state id to "-1", in which case the server will return 51 records for each record received, one for each possible state. You can then pick our the appropriate result on your authorized computer. Don't laugh - it works.
Married folk do not file separate returns in the US, except in unusual circomstances. There is a tax penalty compared to joint filing in almost all cases.
Negative taxes and negative marginal rates are due to refundable tax credits, such as the Earned Income Credit (EIC) and the Additional Chlld Tax Credit.
The FICA estimate includes both employee and employer tax.
For more information about TAXSIM see:
Feenberg, Daniel Richard, and Elizabeth Coutts, An Introduction to the TAXSIM Model, Journal of Policy Analysis and Management vol 12 no 1, Winter 1993, pages 189-194.
This paper and this URL (http://www.nber.org/taxsim/) should be cited if any results from TAXSIM are circulated or published. If you intend to make any serious scholarly (or other) use of Internet TAXSIM you should speak with me about your project on the telephone. I am at 617-588-0343 and can offer advice etc. Don't think I am overwhelmed by calls and won't want to talk with you - I am interested in what people are doing with this tool. Sometimes I can create specialized versions for particular projects.
Date last modified: December 6, 2017 Taxsim home page